月度归档：2019年09月

Harlan Teklad Diet ingredients

发表于由

Harlan Teklad Diet ingredients

Teklad diet, bedding and enrichment + Teklad laboratory animal diets + Custom research diets + Diet ingredients

You may want to prepare your own diet at your research site or facility, and if that is the case, you depend on the ingredients being of the highest quality. Envigo can provide you with many of the same ingredients used to produce our advanced Teklad custom research diets so you can develop your own formula. And as always, our nutritional experts are here to help you make the best decisions for your ingredients and ultimate formulation.

Our ingredients

We offer several ingredients for individual sale so that you can develop your own blends.

“VFT” casein

  • “Vitamin-free” test casein (alcohol-extracted) is best suited for purified test diet formulas where fat or vitamin content needs to be precisely controlled
  • The reduced levels of many vitamins in VFT casein make it the preferred protein source for many vitamin studies. Thus, the nickname “Vitamin-free” was given to the extracted casein many years ago

Vitamin mixes

  • The common vitamin mixes shown below use sucrose or corn starch as a carrier
  • Customized vitamin mixes may use cellulose if a non-nutritive carrier is necessary
  • Vitamin mixes are formulated with a diet inclusion rate in mind. Using more or less than recommended could impair the health of your laboratory animal
  • For those preparing their own diets, vitamin premixes are an efficient way to add vitamins to a diet
  • Vitamin mixes should be stored at 4 degrees celsius or lower upon receipt. Storage at –20 degrees celsius is recommended if the mix will be used beyond 1 month
  • Minimum order is 500 g for both stock and custom vitamin mixes
  • Our available vitamin mixes are commonly used in diets, and are available from stock
  • Vitamin mixes are shipped within a few days of order

Our Formula examples

  • CA.40060 Teklad vitamin mix
  • CA.40077 AIN-76A vitamin mix
  • TD.94047 AIN-93 vitamin mix

Mineral mixes

  • The common mineral mixes shown below as examples use sucrose as a carrier
  • Customized mineral mixes could use cellulose or no carrier if a non-nutritive carrier is necessary
  • Our mineral mixes are formulated with a diet inclusion rate in mind. Using more or less than recommended could impair the health of the animal
  • For those preparing their own diets, mineral premixes are an efficient way to add minerals to a diet
  • Mineral mixes should be stored in a dry cool environment and used within a year of receipt. The minimum order is 500 g for both stock and custom mineral mixes
  • These mineral mixes are commonly used in diets, and are available from stock
  • Our mineral mixes are shipped within a few days of order

Formula examples:

  • CA.170915 AIN-76 mineral mix
  • TD.94046 AIN-93G mineral mix
  • TD.94049 AIN-93M mineral mix

Other mixes (may or may not be available from stock):

  • TD.83171 Vitamin mix without A, D, E, choline
  • TD.81062 Iron deficient mineral mix based on AIN-76A
  • TD.79055 Calcium and phosphorus deficient mineral mixed based on AIN-76
  • TD.98057 Calcium and phosphorus deficient mineral mixed based on AIN-93
  • CA.170760 Rogers-Harper mineral mix

你可能想要在你的研究地点或设施准备你自己的饮食，如果是这样的话，你取决于成分是最高的质量。Envigo可以为您提供许多相同的成分，用于生产我们先进的特克拉德定制研究饮食，以便您可以开发自己的配方。和往常一样，我们的营养专家在这里帮助您为您的配料和最终配方做出佳决定。

我们的配料

我们提供几个配料供个人销售，以便您可以开发自己的混合。

“VFT”酪蛋白

  • “无维生素”测试酪蛋白(酒精提取)最适合于那些需要精确控制脂肪或维生素含量的纯正试验饮食配方。
  • VFT酪蛋白中许多维生素含量的降低使得它成为许多维生素研究的首选蛋白质来源。因此，“无维生素”的绰号是在许多年前给提取出来的酪蛋白起的。

维生素混合物

  • 以下常见的维生素混合物使用蔗糖或玉米淀粉作为载体。
  • 定制的维生素混合物可能使用纤维素，如果非营养载体是必要的。
  • 维生素混合物的制定考虑到了饮食中的包容率。多用或少用会损害你的实验动物的健康。
  • 对于那些自己准备饮食的人来说，维生素预混剂是向饮食中添加维生素的一种有效方法。
  • 维生素混合物应储存在4摄氏度或更低的接收。如果使用时间超过1个月，建议使用摄氏-20度。
  • 库存和定制维生素混合物的最低订购量为500克。
  • 我们可用的维生素混合物通常用于饮食，并可从库存中获得。
  • 维生素混合物在订购后几天内发货。

我们的公式示例

  • CA.40060 特克拉德维生素混合物
  • CA.40077 AIN-76A维生素混合物
  • TD.94047 AIN-93维生素混合物

矿物混合物

  • 下面所示的常见矿物混合物是以蔗糖为载体的。
  • 如果需要非营养的载体，定制的矿物混合物可以使用纤维素，也可以不使用载体。
  • 我们的矿物质混合物是根据饮食包容率来制定的。多用或少用会损害动物的健康。
  • 对于那些自己准备饮食的人来说，矿物预混料是向饮食中添加矿物质的有效方法。
  • 矿物混合物应存放在干燥、凉爽的环境中，并在收到后一年内使用。库存和自定义矿物混合物的最低订购量为500克。
  • 这些矿物混合物通常用于饮食，并可从库存中获得。
  • 我们的矿物混合物在订货后几天内装运。

公式示例：

  • CA.170915 AIN-76矿物混合物
  • TD.94046 AIN-93g矿物混合物
  • TD.94049 AIN-9300万矿物混合物

其他混合材料(可能从库存中获得，也可能无法从库存中获得)：

  • TD.83171不含A，D，E，胆碱的维生素混合物
  • TD.81062基于AIN-76A的缺铁矿物配料
  • TD.79055 AIN-76混合钙磷缺乏矿物
  • TD.98057AIN-93混合钙磷缺乏矿物
  • CA.170760 罗杰斯-哈珀矿物混合物

日本关东化学Kanto 07183-33 溴化铯 Caesium bromide CAS 7787-69-1

发表于由

日本关东化学Kanto 07183-33 溴化铯 Caesium bromide CAS 7787-69-1

日本关东化学代理商–上海金畔生物

代理优势：货期2-3周。

欢迎访问关东化学株式会社Kanto官网或者咨询我们获取更多产品信息。

Product No. 07183-33
Product name Cesium bromide, 4N
Grade high purity reagent
Purity >99.99%(Im.S.)
Package 25g

溴化铯 Caesium bromide

CasNo:7787-69-1  MDL:MFCD00010954

分子式:Br Cs

分子量:212.81

日本ATTO AE-3750干胶仪

发表于由

日本ATTO AE-3750干胶仪

上海金畔生物代理日本ATTO产品，欢迎访问日本ATTO官网或者咨询我们获取更多相关产品信息以及报价。

AE-3750干胶仪 核心参数

    • 定时范围  10~540min

    • 干胶温度 40℃~80℃

  • 干胶面积

    450×380mm

主要特点：

· 干胶面积45×38cm，适合干燥测序胶及多块小胶
· 上下加热，温度一致，保证快速干胶（60分钟内）
· 40-80℃温度可调，数字显示
· 3种加热程序选择
· 极佳的干胶环境，可干燥脆性胶
· TEFLON涂层铝板，防止粘胶
· 加热温度：50℃用上部加热器 40-80℃@5℃用底部加热器
· 首选加热方式：3种方式(1、2或4℃/分钟 for 60℃)
· 定时：10～540mins 10-90@10mins，20～180@20min 或60-540@60min

产品参数

技术参数：

· 干胶面积45×38cm，适合干燥测序胶及多块小胶
· 上下加热，温度一致，保证快速干胶（60分钟内）
· 40-80℃温度可调，数字显示
· 3种加热程序选择
· 极佳的干胶环境，可干燥脆性胶
· TEFLON涂层铝板，防止粘胶
· 加热温度：50℃用上部加热器 40-80℃@5℃用底部加热器
· 首选加热方式：3种方式(1、2或4℃/分钟 for 60℃)
· 定时：10～540mins 10-90@10mins，20～180@20min 或60-540@60min

仪器简介：

· 推荐加热方式：3种方式(1、2或4℃/分钟 for 60℃)

其他相关产品:

AE-3750干胶仪

AE-3750干胶仪

日本ATTO干胶仪AE-3711 mini

日本ATTO干胶仪AE-3711 mini

日本ATTO干胶仪AE-3750

日本ATTO干胶仪AE-3750

日本ATTO水平半干转印仪（蛋白，核酸通用型）AE-6687

日本ATTO水平半干转印仪（蛋白，核酸通用型）AE-6687

日本ATTO水平半干转印仪AE-6685P

日本ATTO水平半干转印仪AE-6685P

日本ATTO温控测序电泳槽AE-6141 Mni-Quencer

日本ATTO温控测序电泳槽AE-6141 Mni-Quencer

日本ATTO测序电泳槽AE-6155

日本ATTO测序电泳槽AE-6155

日本ATTO水平琼脂电泳槽AE-6111

日本ATTO水平琼脂电泳槽AE-6111

日本ATTO等电聚焦电泳仪AE-6541

日本ATTO等电聚焦电泳仪AE-6541

日本ATTO多胶垂直电泳仪AE-7341

日本ATTO多胶垂直电泳仪AE-7341

日本ATTO垂直电泳仪AE-6531

日本ATTO垂直电泳仪AE-6531

日本ATTO垂直电泳仪AE-6531

日本ATTO垂直电泳仪AE-6531

日本ATTO制备电泳AE-6750S

日本ATTO制备电泳AE-6750S

AE-6450垂直电泳槽

AE-6450垂直电泳槽

Lumiprobe 抗体标记试剂盒说明书Antibody labeling kits

发表于由

Lumiprobe 抗体标记试剂盒说明书Antibody labeling kits

The kit is used for the preparation of labeled antibodies having 2.5-3 labels per antibody. The kit contains all reagents and materials for ten labeling reactions, each for 100 ug of the antibody. The dye is an NHS ester, taken in controlled excess. It reacts with the amine groups of lysines the antibody at mild alkaline pH. The purification of the antibody is achieved by gel filtration using spin columns. These kits contain sulfonated, water soluble dyes, that are most suitable for the labeling of sensitive proteins, including antibodies.

Kit components

Kit component Count
1321-10rxn
10 reactions		 3321-10rxn
10 reactions		 7321-10rxn
10 reactions		 5321-10rxn
10 reactions		 6321-10rxn
10 reactions
N1320, Sulfo-Cyanine3 NHS ester, 1 rxn 10 — — — —
N3320, Sulfo-Cyanine5 NHS ester, 1 rxn — 10 — — —
N7320, Sulfo-Cyanine5.5 NHS ester, 1 rxn — — 10 — —
N5320, Sulfo-Cyanine7 NHS ester, 1 rxn — — — 10 —
N6320, Sulfo-Cyanine7.5 NHS ester, 1 rxn — — — — 10
Desalting spin column, PBS 10 10 10 10 10
Desalting receptacle vial, 1.5 mL 10 10 10 10 10
Desalting waste vial, 2 mL 10 10 10 10 10
PBS tablet, for 100 mL of buffer 1 1 1 1 1
15050, DMSO, labeling grade, 1 mL 1 1 1 1 1
1584-05mL, Sodium azide solution, 3%, 0.5 mL 1 1 1 1 1
1689-15mL, Sodium bicarbonate, 126 mg 1 1 1 1 1

Store at temperature between +3 °C and +20 °C. Do not freeze!

Shelf life 12 months

Protocol

1. Antibody preparation.

Optimal conditions for the labeling reaction are the following: antibody at a concentration of 1 mg/mL dissolved in 0.1 M sodium hydrocarbonate solution. Sodium azide is compatible with the labeling. If concentration of antibody is below 1 mg/mL, it should be concentrated. Antibody preparation should be free of aminoacids, proteins like BSA and buffer components that bring pH to unfavourable (2-7.5 or 9-12) ranges.

2. Setting up the reaction.

2.1. Add a solution of antibody in sodium hydrocarbonate (100 ug in 100 uL*) to the fluorophore, vortex, and incubate for 30 min at room temperature.

* if a smaller amount of antibody is to be labeled, dissolve lyophilized dye in 10 uL of anhydrous DMSO, and take 1 uL of the solution per 10 ug of antibody. The solution of dye in DMSO should be consumed immediately.

3. Purification of the labeled antibody.

3.1. Prepare the column. The column should be at room temperature prior to use. The gel should be resuspended using vortex. Put the column into a waste receptacle (without cap), and centrifuge for 2 min at 1,000 g (speed must be carefully controlled – for standard 6 cm rotor, 1,000 g = 3800 rpm). The small bulge of the column should be oriented outwards.

3.2. Apply 400 uL of 1x PBS buffer, centrifuge for 2 min at 1,000 g.

3.3. Remove the column from waste receptacle. Put it into collection tube (with cap). Apply 100 uL of the reaction mixture onto the column, incubate for 1 min, and elute the antibody by centrifugation for 2 min at 1,000 g. Add 1/100 volume of 100x sodium azide. Antibodies can be aliquoted to improve their shelf life. Current aliquot can be stored at +4°С the rest at -20°С.

4. Measurement of dye to antibody ratio.

To calculate dye to antibody ratio, measure absorption spectrum of the conjugate, or absorption at 280 nm (AAB), and at dye absorption maximum (ADye). A typical absorption spectrum of a dye labeled antibody is shown below. Depending on the dye, wavelength of the maximum may vary.

Labeled antibody absorption spectrum

An absorption spectrum of a labeled antibody contains dye peak (with longer wavelength), and antibody peak (at around 280 nm). Dye to antibody ratio is calculated using the following formula:

Calculation of dye to antibody ratio

with Dye/AB – average number of fluorophores per antibody molecule, Adye – optical density of the sample at dye absorption maximum, AAB – sample optical density at 280 nm, εAB – molar extinction coefficient of antibody at 280 nm (210,000 for IgG), εDye – molar extinction coefficient of dye at absorption maximum (see table below), CF280 – correction factor for dye (see table below).

Dye λmax, nm ε CF280
sulfo-Cyanine3 548 162,000 0.06
sulfo-Cyanine5 646 271,000 0.04
sulfo-Cyanine5.5 673 195,000 0.11
sulfo-Cyanine7 750 240,600 0.04
sulfo-Cyanine7.5 778 222,000 0.09

Example of calculation

After labeling of IgG antibody with sulfo-Cyanine5 and purification, a solution has been obtained with absorption spectrum above. Determine dye to protein ratio.

Using absorption spectrum, the following values can be found: ADye = 0.184 at dye absorption maximum (646 nm, see the table), AAB = 0.066 (at 280 nm), εAB = 210000 for IgG; εDye = 271,000, and CF280 = 0.04.

Dye/AB – is 2.43 fluorophore molecules per antibody.

Interpretation of results, and antibody storage

In most cases, optimal dye to antibody ratio is 2-3 dye molecules per antibody. Increase of dye loading above this value does not improve fluorescent signal because of the concentrational quenching of the fluorescence. When too few fluorophores are attached during the reaction, decrease antibody loading per reaction. Use of expired kit can also lead to this result.

We recommend to test binding of labeled antibodies with their antigens. The labeled antibodies can be stored at -20°С. An aliquot that is currently in use, should be stored at +4°С to avoid freeze-thaw cycles. The stability of the conjugate is determined by antibody itself rather than fluorophore or the chemical bond. Labeled antibodies should not be exposed to direct sunlight for extended time, but tolerate ambient lighting well.

Related kits

sulfo-Cyanine3 antibody labeling kit

Ready to use kit for the labeling of antibodies (other proteins can be labeled as well) with sulfo-Cyanine3 dye via NHS ester chemistry. The kit contains all necessary chemicals and consumables.

Show pricing

sulfo-Cyanine5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine5 dye, a fluorophore for Cy5 channel.

Show pricing

sulfo-Cyanine5.5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine5.5 dye, a fluorophore for Cy5.5 channel.

Show pricing

sulfo-Cyanine7 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine7 dye, a fluorophore for Cy7 channel.

Show pricing

sulfo-Cyanine7.5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine7.5 dye, a fluorophore for Cy7.5 channel.

Show pricing

Lumiprobe 蛋白质标记试剂盒 Protein labeling kits

发表于由

Lumiprobe 蛋白质标记试剂盒 Protein labeling kits

上海金畔生物代理Lumiprobe品牌产品，欢迎新老客户访问Lumiprobe官网或者咨询我们获取更多相关产品信息。

Lumiprobe protein labeling kits contain pre-aliquoted reactive dye, all necessary auxiliary components and buffers, and desalting spin columns to achieve efficient, reproducible labeling of antibodies, and other proteins.

The labeled protein is purified by means of gel filtration on gel filled spin columns that are enclosed. This protocol ensures complete removal of the unbound dye, and excellent recovery of the labeled product. The protein is eluted in PBS buffer, ready for the use in most downstream applications.

The protocol is quick, effortless, and easy to follow.

Lumiprobe 探针蛋白标记试剂盒包含预先引用的活性染料、所有必需的辅助成分和缓冲器，以及脱盐自旋柱，以实现抗体和其他蛋白质的高效、可复制的标记。

标记蛋白是通过凝胶过滤纯化的凝胶填充自旋柱是封闭的。该协议确保完全去除未结合染料，并出色地恢复标记产品。该蛋白在PBS缓冲液中被洗脱，可以在大多数下游应用中使用。

该试剂盒具有快速，毫不费力，易于遵循等优点。

sulfo-Cyanine3 antibody labeling kit

Ready to use kit for the labeling of antibodies (other proteins can be labeled as well) with sulfo-Cyanine3 dye via NHS ester chemistry. The kit contains all necessary chemicals and consumables.

sulfo-Cyanine5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine5 dye, a fluorophore for Cy5 channel.

sulfo-Cyanine5.5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine5.5 dye, a fluorophore for Cy5.5 channel.

sulfo-Cyanine7 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine7 dye, a fluorophore for Cy7 channel.

sulfo-Cyanine7.5 antibody labeling kit

A kit for the labeling of antibodies with sulfo-Cyanine7.5 dye, a fluorophore for Cy7.5 channel.

GE healthcare 代理

发表于由

GE healthcare,GE代理

上海金畔生物代理GE healthcare品牌产品，欢迎新老客户发访问GE healthcare官网或者咨询我们获取跟到相关产品信息。
LABEL,TYPHOON TRIO+ BEZEL ,    货号:28909645|28-9096-45

Bearing 85/75 x 30 PTFE,      货号:28909660|28-9096-60

PCA Backplane Typhoon II,    货号:28909805|28-9098-05,SERVICES

Cu900=>Cu950 incl. Document up,    货号:28910181|28-9101-81,
Peek converter 5/16 female to,    货号:28910336|28-9103-36,
Bearing 60/52 L 40 PTFE,   货号:28913527|28-9135-27,
Shim plate 0,5mm flowcell 12mm,   货号:28913705|28-9137-05,
High voltage cable,   货号:28913758|28-9137-58,
Tie Bar assm, complete,   货号:28913802|28-9138-02,
Ph Flow Cell system 2012,   货号:28913833|28-9138-33,
CBL ASSY RND ECHELON TERMIN,   货号:28915988|28-9159-88,
Conductivity sensor 12mm PFR91,   货号:28916184|28-9161-84,
Conductivity sensor 12mm EPDM,   货号:28916197|28-9161-97,
Hood, cpl.,   货号:28916225|28-9162-25,
U-shaped tubing sys 1108,   货号:28916257|28-9162-57,
Air trap lid,   货号:28916396|28-9163-96,
Air trap Bottom,   货号:28916398|28-9163-98,
Distributor for 03-007 – L3503,   货号:28916525|28-9165-25,
Tubing for system 1566,   货号:28916526|28-9165-26,
Distributor 450 PP,   货号:28917067|28-9170-67,
Distributor 800 PEHD500,   货号:28917069|28-9170-69,
Distributor 600 PTFE,   货号:28917072|28-9170-72,
Screw for net 316L,   货号:28917079|28-9170-79,
Nut for net 316L,   货号:28917083|28-9170-83,
Media Valve 253mm 316L,   货号:28917105|28-9171-05,
Bed support retainer ring,   货号:28917156|28-9171-56,
Distributor 450 PEHD500,   货号:28917198|28-9171-98,
Distributor 600 PEHD500,   货号:28917202|28-9172-02,
Leak detection tube 450700,   货号:28917226|28-9172-26,
Column tube 650, qty 2,   货号:28917277|28-9172-77,
Manual Valve SISTO with TC,   货号:28917318|28-9173-18,
Tube G, sys 01151505,   货号:28917334|28-9173-34,
Rinse station (upgraded Digest,   货号:28917400|28-9174-00,
Nut for distributor 316L,   货号:28917597|28-9175-97,
Piston guide,   货号:28918175|28-9181-75,
Main pcb IPGphor III,   货号:28918298|28-9182-98,
CU-960 UPPGR.KIT F BIOPROCESS,   货号:28918344|28-9183-44,
Plate, Frac-950,   货号:28918777|28-9187-77,
Manifold for 2161,   货号:28918865|28-9188-65,
Pump house,   货号:28919060|28-9190-60,
Pump manifold SS 16mm Custom,   货号:28919163|28-9191-63,
Media valve LPV03400,   货号:28919283|28-9192-83,
600 Distributor with 5 um net,   货号:28919297|28-9192-97,
Column Tube 450/500,   货号:28919449|28-9194-49,
Column Tube 450/750,   货号:28919450|28-9194-50,
T-Junction,   货号:28919452|28-9194-52,
FRAME CPL. (IPGphor 3),   货号:28919587|28-9195-87,
Base/Position plate,   货号:28920525|28-9205-25,
Shim plate 2mm flowcell 12mm,   货号:28920682|28-9206-82,
Shim plate 0,5mm flowcell 8mm,   货号:28920684|28-9206-84,”
“Pipe for system no 1120,   货号:28920767|28-9207-67,
Customized extender rods for C,   货号:28920989|28-9209-89,
Tubes B and C, qty 2, system n,   货号:28921004|28-9210-04,
Base arm and switch for Frac 9,   货号:28921007|28-9210-07,
Arm holding accumulator, item,   货号:28921099|28-9210-99,
Pump P-907 complete,   货号:28921146|28-9211-46,
Flow diverter,   货号:28921214|28-9212-14,
Net 450mm, 5my SS,   货号:28921365|28-9213-65,
pH flow cell and adaptor, syst,   货号:28921502|28-9215-02,
PH adaptor, stainless steel,   货号:28921607|28-9216-07,
NET LP/MP 500 2UM AISI316L,   货号:28921735|28-9217-35,
Dispenser arm (56310314,   货号:28922172|28-9221-72,
Housing for Frac920,   货号:28922217|28-9222-17,
Tube A, qty 2, system no 1341,   货号:28922289|28-9222-89,
Distributors 300, 2my net,   货号:28922349|28-9223-49,
Top cover, AKTA Crossflow,   货号:28922383|28-9223-83,
Welded distributor HPLC 600,   货号:28922406|28-9224-06,
Column tube for HPLC-150,   货号:28922459|28-9224-59,
Adaptor FinlineP,   货号:28922502|28-9225-02,
Wheel with Brake BPG 450,   货号:28922677|28-9226-77,
Black alignment rods, qty 3,   货号:28922801|28-9228-01,
Pump Head AKTAmicro,   货号:28923066|28-9230-66,
Monitor UV-900P Cpl,   货号:28923194|28-9231-94,
TYPHOON FW ISA IDE FLASH MODUL,   货号:28923204|28-9232-04,
Distributor 300, 20my net,   货号:28923301|28-9233-01,
Screws and washers,   货号:28923313|28-9233-13,
Top flange HM30402,   货号:28923319|28-9233-19,
Piston top HM30403,   货号:28923321|28-9233-21,
Piston bottom HM30405,   货号:28923323|28-9233-23,
Threaded rod HM30408,   货号:28923363|28-9233-63,
Bedsupport CF 1400 Adaptor Has,   货号:28923366|28-9233-66,
Bedsupport CF 1400 Bottom Hast,   货号:28923367|28-9233-67,
Shock abs. lower AxiCh600-1000,   货号:28923377|28-9233-77,
Threaded block HM30409,   货号:28923406|28-9234-06,
Adjust nut HM30411,   货号:28923409|28-9234-09,
Piston HM30417,   货号:28923424|28-9234-24,
Bed support CF 1200 Adaptor 90,   货号:28923431|28-9234-31,
Bed support CF 1200 Bottom 904,   货号:28923433|28-9234-33,
Threaded block holder HM30410,   货号:28923436|28-9234-36,
Column tube AxiCh 600 short,   货号:28923477|28-9234-77,
Bed sup.screw bot.AxiCh300-600,   货号:28923481|28-9234-81,
Bed sup.screw top AxiCh300-600,   货号:28923482|28-9234-82,
Distributor, bottom, AxiCh600,   货号:28923485|28-9234-85,
Distributor, adaptor, AxiCh600,   货号:28923486|28-9234-86,
Locking part AxiCh 600,   货号:28923491|28-9234-91,
Fastener, bottom, AxiCh600,   货号:28923493|28-9234-93,
Fastener adaptor AxiCh600,   货号:28923494|28-9234-94,
Hinge lower asm AxiCh300-600,   货号:28923495|28-9234-95,
Locking pin asm AxiCh300-600,   货号:28923496|28-9234-96,
Column tube HM3001500,   货号:28923616|28-9236-16,”
“Motor valve Push-Pull,   货号:28923623|28-9236-23,
Motor CPL Peek Exp Push-Pull,   货号:28923651|28-9236-51,
Tube with connectors HM30464,6,   货号:28923680|28-9236-80,
Locking part AxiCh 400,   货号:28923746|28-9237-46,
Fastener, bottom AxiCh 400,   货号:28923748|28-9237-48,
Fastener,adaptor AxiCh 300-450,   货号:28923750|28-9237-50,
Bed supp. 10um AxiCh 400 bot.,   货号:28923776|28-9237-76,
Bed supp. 10um AxiCh 400 top S,   货号:28923780|28-9237-80,
Distributor AxiCh 400 bott. PP,   货号:28923782|28-9237-82,
Distributor AxiCh 400 top PP,   货号:28923785|28-9237-85,
Column tube AxiCh 400 short,   货号:28923796|28-9237-96,
Air trap with shield,   货号:28923819|28-9238-19,
Locking part AxiCh 1000,   货号:28923833|28-9238-33,
Fastener bottom AxiCh 1000,   货号:28923835|28-9238-35,
Fastener adaptor AxiCh 1000,   货号:28923837|28-9238-37,
Hinge lower asm AxiCh 1000,   货号:28923839|28-9238-39,
Locking pin asm 800-1000,   货号:28923841|28-9238-41,
Bedsup.screw bot.AxiCh800-1000,   货号:28923864|28-9238-64,
Bedsup.screw top AxiCh800-1000,   货号:28923866|28-9238-66,
Bed supp.AxiCh1000 10um bot.SS,   货号:28923870|28-9238-70,
Bed supp.AxiCh1000 10um top SS,   货号:28923874|28-9238-74,
Distributor AxiCh 1000 bott. P,   货号:28923876|28-9238-76,
Distributor AxiCh 1000 top PP,   货号:28923878|28-9238-78,
Column tube AxiCh 1000 short,   货号:28923912|28-9239-12,
Conn.top inl. AxiCh800-1000,PP,   货号:28923931|28-9239-31,
Pump plate,   货号:28924029|28-9240-29,
Packing Crate, AKTA Pilot,   货号:28924097|28-9240-97,
Valve Plate,   货号:28924141|28-9241-41,
Adaptor 50 for AxiChrom Pilot,   货号:28924519|28-9245-19,
Bed support 50 top, 10 SS,   货号:28924562|28-9245-62,
Bed support 50 top, 20 SS,   货号:28924564|28-9245-64,
Adaptor 70 for Axichrom Pilot,   货号:28924566|28-9245-66,
Bed support 70 top, 10 SS,   货号:28924574|28-9245-74,
Bed support 70 top, 20 SS,   货号:28924576|28-9245-76,
Check Valve Kit AKTAmicro,   货号:28924679|28-9246-79,
Piston Kit AKTAmicro,   货号:28924680|28-9246-80,
Seal Kit AKTAmicro,   货号:28924689|28-9246-89,
Purge Valve AKTAmicro,   货号:28924692|28-9246-92,
Cond flow cell,   货号:28925004|28-9250-04,
10l glass tube 200mm ID,   货号:28925561|28-9255-61,
parts for Picker, spotter,   货号:28925562|28-9255-62,
Distributor, CF1000 Bottom,   货号:28926103|28-9261-03,
Distributor, CF1000 Adapter,   货号:28926105|28-9261-05,
Net 140, pore size 10my SS,   货号:28926122|28-9261-22,
Glass tube, BPG300,   货号:28926497|28-9264-97,
Door AKTA OligoPilot, Cpl,   货号:28926624|28-9266-24,
T-tubing system 1541,   货号:28926641|28-9266-41,
Tubing kit 1597,   货号:28926645|28-9266-45,
Column tube CF400/500-700,   货号:28926662|28-9266-62,
Screw for Net,   货号:28926688|28-9266-88,”
“Nut for Net,   货号:28926739|28-9267-39,
Locking part AxiCh 800,   货号:28926871|28-9268-71,
Fastener bottom AxiCh 800,   货号:28926873|28-9268-73,
Fastener adaptor  AxiCh 800,   货号:28926875|28-9268-75,
Hinge lower asm AxiCh800,   货号:28926881|28-9268-81,
Flushing connection,   货号:28926899|28-9268-99,
Flushing connection nut,   货号:28926901|28-9269-01,
Distributor AxiCh800 bott. PP,   货号:28926942|28-9269-42,
Distributor AxiCh800 top PP,   货号:28926944|28-9269-44,
Column tube AxiCh 800 short,   货号:28926969|28-9269-69,
Mounting tool,  2 inch Nozzle,   货号:28927033|28-9270-33,
Nozzle tip, 2 inch with o-ring,   货号:28927036|28-9270-36,
Bed support retaining nut, 2 i,   货号:28927041|28-9270-41,
Tool, bed support retaining nu,   货号:28927055|28-9270-55,
Flow cells, cond,cond,pH, syst,   货号:28927222|28-9272-22,
Packing Crate, Ettan MDLC,   货号:28927731|28-9277-31,
Gate/Door to AKTA FPLC Rack,   货号:28927803|28-9278-03,
OLIGOPILOT CONNECTBLOCK OLIGO,   货号:28928103|28-9281-03,
OLIGOPILOT CONNECTBLOCK OLIGO,   货号:28928104|28-9281-04,
OLIGOPILOT CONNECTBLOCK OLIGO,   货号:28928105|28-9281-05,
OLIGOPILOT CONNECTBLOCK OLIGO,   货号:28928106|28-9281-06,
Glasstube OD 160mm,   货号:28928275|28-9282-75,
Adaptor Top Plate/Flange BPG 3,   货号:28928281|28-9282-81,
Monochromator cpl UV-900 and S,   货号:28928296|28-9282-96,
pH and pressure flowcell ID6mm,   货号:28929073|28-9290-73,
Pump complete to P960,   货号:28929516|28-9295-16,
Low pressure Valve cpl,   货号:28929794|28-9297-94,
High pressure valve cpl,   货号:28929830|28-9298-30,
620LG pumphead cpl,   货号:28929840|28-9298-40,
Harness reed switch,   货号:28929859|28-9298-59,
Pressure sensor unit P1 cpl,   货号:28929863|28-9298-63,
Pressure sensor unit P2 cpl,   货号:28929866|28-9298-66,
Pressure sensor unit P3 cpl,   货号:28929868|28-9298-68,
Pressure sensor lead P1,   货号:28929870|28-9298-70,
Pressure sensor lead P2,   货号:28929873|28-9298-73,
Pressure sensor lead P3,   货号:28929875|28-9298-75,
PS cabinet seal EPDM,   货号:28929877|28-9298-77,
Pressure cell holder kit,   货号:28929887|28-9298-87,
pH Lead cpl,   货号:28929921|28-9299-21,
Transducer UF-900,   货号:28929929|28-9299-29,
UF-900 CPL,   货号:28929949|28-9299-49,
Bed supports, top+bottom, BPSS,   货号:28930004|28-9300-04,
Temp sensor cpl,   货号:28930198|28-9301-98,
IR temp sensor,   货号:28930209|28-9302-09,
Pneumatic cylinder LP cpl,   货号:28930220|28-9302-20,
Pneumatic cylinder HP cpl,   货号:28930242|28-9302-42,
Valve PV-930,   货号:28930244|28-9302-44,
Valvemate 2 special SW,   货号:28930247|28-9302-47,
Temp sensor cabinet seal EPDM,   货号:28930249|28-9302-49,
UV sensor cpl,   货号:28930253|28-9302-53,”
“UV Led cpl,   货号:28930257|28-9302-57,
UV filter 280nm,   货号:28930269|28-9302-69,
Gasket kit UV housing,   货号:28930272|28-9302-72,
UV Interface box,   货号:28930274|28-9302-74,
Cond sensor lead cpl,   货号:28930278|28-9302-78,
Cooling fan 120x120x38 24VDC,   货号:28930283|28-9302-83,
Hardware and strategy for chan,   货号:28930297|28-9302-97,
Pilot Valve interface,   货号:28930303|28-9303-03,
Piston for the pump head,   货号:28930458|28-9304-58,
Hose stop cpl,   货号:28930537|28-9305-37,
Distributor 9924405,   货号:28930580|28-9305-80,
End Piece, P-920,   货号:28930586|28-9305-86,
Adaptor LP45403,   货号:28930606|28-9306-06,
Airtrap 3,5l with burt cover,   货号:28930665|28-9306-65,
Valve Cabinet seal kit EPDM,   货号:28931223|28-9312-23,
PE KIT CHR 600 ACRMAN 10UM,   货号:28931789|28-9317-89,
Screw M8x20 PTFE covered,   货号:28931886|28-9318-86,
Bed support bottom BPG450 1.44,   货号:28931892|28-9318-92,
Bed support Adaptor BPG450 1.4,   货号:28931893|28-9318-93,
Bed support bottom BPG450 1.45,   货号:28931923|28-9319-23,
Bed support Adaptor BPG450 1.4,   货号:28931930|28-9319-30,
Extension cable 2-pol. E.g. Fa,   货号:28932085|28-9320-85,
TOP PLATE BPG 200,   货号:28932515|28-9325-15,
Mounting plate, AKTA Purifier,   货号:28932534|28-9325-34,
Pump cabinet seal,   货号:28932897|28-9328-97,
Seal, EPDM,   货号:28932905|28-9329-05,
Guide ring 100,   货号:28932943|28-9329-43,
Load cell tool,   货号:28932962|28-9329-62,
Special Screw M4x17,   货号:28932986|28-9329-86,
Scraper 100 UHMWPE,   货号:28932996|28-9329-96,
Bed support 100 bottom 10SS,   货号:28932999|28-9329-99,
Bed support 100, bottom 20SS,   货号:28933001|28-9330-01,
VALVE HOUSE MOD,   货号:28933158|28-9331-58,
PUMP HOUSE MOD,   货号:28933159|28-9331-59,
RINSING HOUSE MOD,   货号:28933160|28-9331-60,
SEALING PACKAGE CPL,   货号:28933166|28-9331-66,
Media valve with sensors,   货号:28933277|28-9332-77,
BcT100 control SW 1.1.1 CD,   货号:28933778|28-9337-78,
Bc3000 control SW 4.1 CD,   货号:28933780|28-9337-80,
Stator with air sensor and rot,   货号:28933784|28-9337-84,
Stator and rotor, injection,   货号:28933787|28-9337-87,
Stator and rotor, column.,   货号:28933793|28-9337-93,
Stator and rotor, pH,   货号:28933797|28-9337-97,
Bc2000 control SW 3.2.1 CD,   货号:28933800|28-9338-00,
Stator and rotor, Outlet,   货号:28933804|28-9338-04,
P9 Drive Unit,   货号:28933811|28-9338-11,
Ceramic pump cylinder 50 ml,   货号:28934014|28-9340-14,
UV monitor U9-M excl detector,   货号:28934089|28-9340-89,
UV detector U9-D excl cell,   货号:28934096|28-9340-96,
Lamp Xenon cpl,   货号:28934102|28-9341-02,”
“UV Test Cell,   货号:28934395|28-9343-95,
Column Tube CF650,   货号:28934487|28-9344-87,
Door right Cpl BC T100,   货号:28934671|28-9346-71,
Cu-950 back panel and accessor,   货号:28934694|28-9346-94,
Nozzle 1.5 inch pneumatic comp,   货号:28934706|28-9347-06,
Nozzle 2 inch pneumatic comple,   货号:28934711|28-9347-11,
I9 Instrument control unit,   货号:28934737|28-9347-37,
D9 Instrument display,   货号:28934739|28-9347-39,
Waste adaptor with plug,   货号:28934822|28-9348-22,
Locking rod M30,   货号:28935182|28-9351-82,
Spring Type B (pack of 200),   货号:28935373|28-9353-73,
Hg Lamp Replacement (1X),   货号:28935493|28-9354-93,
Bed supp. Adaptor CF 400 P10,   货号:28935768|28-9357-68,
Glass tube for packing device,,   货号:28935901|28-9359-01,
Airtrap 0.5in PP PFR91,   货号:28936268|28-9362-68,
Airtrap 1in PP FEP PFR91,   货号:28936276|28-9362-76,
Zn Lamp Replacement (1X),   货号:28936572|28-9365-72,
Mounting Brackets, Valves,   货号:28936600|28-9366-00,
Scraper AxiCh 800, UHMWPE,   货号:28936805|28-9368-05,
Column tube AxiCh 800 long,   货号:28936813|28-9368-13,
Flushing Inlet Tubing,   货号:28936817|28-9368-17,
Pneumatic Valve AxiCh800-1000,   货号:28936825|28-9368-25,
Scraper AxiCh 600 UHMWPE,   货号:28937141|28-9371-41,
Column tube AxiCh 600 long,   货号:28937157|28-9371-57,
Tube MP, AxiCh600 bottom SS,   货号:28937165|28-9371-65,
Tube SP, AxiCh600 bottom SS,   货号:28937168|28-9371-68,
Tube CIP, AxiCh600 bottom SS,   货号:28937171|28-9371-71,
Conn. top inl. AxiCh400-600 SS,   货号:28937174|28-9371-74,
Connector top inlet AxiChrom 8,   货号:28937181|28-9371-81,
Tube MP, AxiCh800 bottom SS,   货号:28937184|28-9371-84,
Tube SP, AxiCh800 bottom SS,   货号:28937187|28-9371-87,
Tube CIP, AxiCh800 bottom SS,   货号:28937190|28-9371-90,
Pneumatic Cyl.asm AxiCh300-600,   货号:28937193|28-9371-93,
Bottle Cap, 4 Tubes,   货号:28937707|28-9377-07,
Piston and Distributor,   货号:28938010|28-9380-10,
Bubbletrap Gasket Kit, 172×150,   货号:28938088|28-9380-88,
BED SUPP. CF600 BOTTOM, P10,   货号:28938489|28-9384-89,
BED SUPP. CF600 ADAPTOR, P10,   货号:28938492|28-9384-92,
Spoolpiece,   货号:28939108|28-9391-08,
Z-motor Drive with housing for,   货号:28939687|28-9396-87,
Shock absorber, lower AxiCh 40,   货号:28939916|28-9399-16,
Column tube AxiCh 400 long,   货号:28939938|28-9399-38,
Bed supp. 20um AxiCh 400 bot.,   货号:28939982|28-9399-82,
Bed supp. 20um AxiCh 400 top S,   货号:28939989|28-9399-89,
Scraper, AxiCh 400,   货号:28939997|28-9399-97,
Tube MP bottom AxiCh 400 SS,   货号:28940048|28-9400-48,
Tube SP bottom AxiCh 400 SS,   货号:28940052|28-9400-52,
Tube CIP bottom AxiCh 400 SS,   货号:28940055|28-9400-55,
Column tube AxiCh 1000 long,   货号:28940117|28-9401-17,
Bed supp.AxiCh1000 20um bot.SS,   货号:28940127|28-9401-27,

日本关东化学Kanto 碳纳米材料 Carbon nano materials

发表于由

日本关东化学Kanto 碳纳米材料 Carbon nano materials

日本关东化学Kanto 电池研究试剂 Reagents for battery research

日本关东化学代理商–上海金畔生物

代理优势：货期2-3周。

欢迎访问关东化学株式会社Kanto官网或者咨询我们获取更多产品信息。

Carbon Nano Materials

Warped nanographene(WNG) is a new shaped carbon nanomaterial which has a

grossly warped structure. WNG is a novel nanocarbon following the sphere-

shaped fullerene, tube-shaped carbon nanotube and sheet-shaped graphene.

Research such as product development using this new carbon nanomaterial is

expected since there is a possibility of having unknown characteristics besides op-

tical and electrical characteristics.

We Kanto Chemical launched WNG which was developed in the two-step syn-

thesis method from Corannulene by Prof. Itami, Nagoya University, Institute of

Transformative Bio-Molecules and Prof, Segawa Nagoya University, School of Sci-

ence.

Product List

Warped nanographene    45043-65

[1448513-72-1]

Cycloparaphenylene

Carbon Nanotube(CNT) is well-known as high potential materials which has high

mechanical strength and highly conductivity.

Therefore, it is expected to be applies in a wide range of fields. However, Selec-

tive Synthesis method for target diameter and structure still has not been found.

Prof. Itami, Nagoya University, Institute of Transformative Bio-Molecules and Prof,

Segawa Nagoya University, School of Science successfully synthesized uniform

CNTs by a bottom-up procedure starting from Cycloparaphenylen(CPP) as a tem-

plate compound the first time in the world. The CPP attracted researchers in fun-

damental chemistry and material science, because it is a unit structure of CNT.

KANTO CHEMICAL offers [9],[12],[15]Cycloparaphenylen.

Product List

[9]Cycloparaphenylene  08131-35    CAS  1092522-74-1

[12]Cycloparaphenylene   08132-35  CAS    [1092522-75-2]  FW:913.15

[15]Cycloparaphenylene  08137-65  CAS    [1222565-89-0]  FW:1141.44

参考文献

・Segawa, Y.; Fukazawa, A.; Matsuura, S.; Omachi, H.; Yamaguchi, S.; Irle, S.; Itami, K.Org. Biomol. Chem. 2012, 10, 5979-5984.

・Omachi, H.; Nakayama, T.; Takahashi, E.; Segawa, Y.; Itami, K. Nat. Chem. 2013, 5, 572-576.

Corannulene

Corannulene, the so-called [5]circulene, is one of the polycyclic aromatic compounds. It

has a condensed structure of five benzene rings. The corannulene is attractive as a

nanocarbon material, because it is a unit structure of C60 fullerene. That attracted re-

searchers in fundamental chemistry and material science.

07363-65    07363-35   Corannulene ※Purity（HPLC）：>94.0%

[5821-51-2] FW:250.30

07435-95   Corannulene, high purity  25 g  ※Purity（HPLC）：>99.0%

[5821-51-2] FW:250.30

日本关东化学Kanto 电池研究试剂 Reagents for battery research

发表于由

日本关东化学Kanto 电池研究试剂 Reagents for battery research

日本关东化学代理商–上海金畔生物

代理优势：货期2-3周。

欢迎访问关东化学株式会社Kanto官网或者咨询我们获取更多产品信息。

KANTO CHEMICAL offers a variety of Reagents that can be used for the research for Battery appli-

cations, as seen in the tables below. We control and guarantee moisture level and metal impurity.

Electrolyte for advanced material research

Lithium salts guaranteed moisture level and Metal impurities

＜Package＞

Glass + Nitrogen Filled gas + Lamizip(+ Inert gas) + Desiccant

Please store with filling inert gas after use.

Product Code

Lithium hexafluorophosphate    24077-35  

Product No. 24077-35
Product name
Grade for advanced material research
Purity >99.5%(Im.S.)
Package 25g
Formula LiPF6
Formula weight 151.93
CAS No. 21324-40-3

Lithium hexafluorophosphate    24077-25

Product No. 24077-35
Product name Lithium hexafluorophosphate
Grade for advanced material research
Purity >99.5%(Im.S.)
Package 25g
Formula LiPF6
Formula weight 151.93
CAS No. 21324-40-3

Lithium tetrafluoroborate   24078-35

Product No. 24078-35
Product name Lithium tetrafluoroborate
Grade for advanced material research
Purity >99.5%(Im.S.)
Package 25g
Formula LiBF4
Formula weight 93.77
CAS No. 14283-07-9

Lithium perchlorate    24136-35

Product No. 24136-35
Product name Lithium perchlorate
Grade for advanced material research
Purity >99.5%(Im.S.)
Package 25g
Formula LiClO4
Formula weight 106.42
CAS No. 7791-03-9

Lithium perchlorate  24136-25

Product No. 24136-35
Product name Lithium perchlorate
Grade for advanced material research
Purity >99.5%(Im.S.)
Package 25g
Formula LiClO4
Formula weight 106.42
CAS No. 7791-03-9

Lithium bis(fluorosulfonyl)imide   24076-55

Product No. 24076-55
Product name Lithium bis(fluorosulfonyl)imide
Grade for advanced material research
Purity >99.5%(T)
Package 5g
Byname ＬｉＦＳＡ
ＬｉＦＳＩ
Formula (FO2S)2NLi
CAS No. 171611-11-3

Lithium bis(fluorosulfonyl)imide   24076-35

Product No. 24076-35
Product name Lithium bis(fluorosulfonyl)imide
Grade for advanced material research
Purity >99.5%(T)
Package 25g
Byname ＬｉＦＳＡ
ＬｉＦＳＩ
Formula (FO2S)2NLi
CAS No. 171611-11-3

Mixed solvent for Electrochemistry

We control and guarantee moisture level and metal impurity same as Dehydrated solvent for Elec-trochemistry.

14065-23

14065-08  500 mL

14066-23  100 mL

14066-08

14067-23  100 mL

14067-08

14068-23  100 mL

14068-08  500 mL

Dehydrated solvent for Electrochemistry

14121-23  CAS  110-71-4

10232-23  CAS 111-96-6

10232-08  CAS 110-71-4

40276-23  CAS 112-49-2

40276-08  CAS 112-49-2

14086-25  CAS 96-49-1

14086-05  CAS 96-49-1

Product Code

14741-23  100 mL  CAS  623-53-0

14741-08  500 mL 

32455-23  100 mL  CAS   108-32-7

32455-08  500 mL

14075-23  100 mL   CAS  105-58-8

14075-08  500 mL

10340-23  100 mL CAS  616-38-6

10340-08  500 mL

01030-23  100 mL  CAS  75-05-8

01030-08  500 mL

32130-23  100 mL CAS 107-12-0

32130-08

04512-23  100 mL  CAS  96-48-0

04512-08  500 mL

25336-23  100 mL  CAS 872-50-4

25336-09  500 mL