日水 (Nissui) 快速测试皿使用说明书

日水 (Nissui) 快速测试皿使用说明书

NISSUI制药公司提供全套食品和环境卫生检测产品,适合于食品相关机构、医院、药品制造企业、实验室及其他药品相关机构。 用于食品卫生检测、环境控制、食品毒性检测、水中大肠杆菌检测、食品过敏性检测、食品生产环境的清洁检测、菌落计数及控制系统。

本品用于微生物计数及检测,简易性相当于3M公司的Petrifilm 微生物检测纸片,但其有具有平板的性质,检测灵敏性准确性优于Petrifilm

原理:一旦液体样品滴入,样品就会自动均匀扩 散入平板,被包被固体培养基转化成凝胶

特性:
小而致密的固体培养基(已灭菌)
样品可在平板中自动均匀扩散
基于显色底物的清晰显色
与常规方法(混合稀释培养)有较好的相 关性
可挑取群落且非常容易
可常温保存,保质期在一年以上

使用:
A. Compact Dry “Nissui” TC(菌落总数计数板)
性质:该培养基由非选择性的培养基和氧化还原指示剂氧化三苯基四氮唑(TTC)组成,多数菌落生长在TC上显红色
步骤:
1、将样品稀释
2、将稀释样品加到培养基上
3、培养48小时
4、读取所有菌落

B. Compact Dry “Nissui”CF (大肠菌群计数板)
性质:大肠菌类会在培养基上显现蓝或蓝绿色的菌落,指示剂为X-GAL,除大肠菌类外的细菌被抑制,即使生长也不能形成带色菌落
步骤:
1、将样品稀释
2、将稀释样品加到培养基上
3、培养24小时
4、读取所有蓝和蓝绿色菌落

C. Compact Dry “Nissui”EC(大肠杆菌及大肠菌群计数板)
性质:培养基含有两种产色的酶底物品红-GAL和X-GLUC,大肠杆菌显蓝或蓝绿色,除大肠杆菌外的大肠菌类显红或粉红色
步骤:
1、将样品稀释
2、将稀释样品加到培养基上
3、培养48小时
4、读取所有蓝和蓝绿色菌落即为大肠杆菌,读取所有红蓝菌落总和即为大肠菌类的总数

D. Compact Dry “Nissui”SA(金黄色葡萄球菌计数板)
性质:金黄色葡萄球菌产生黄色素显现亮黄色菌落,并且用它的酶分解蛋黄的脂质-蛋白质复合物,该酶将菌落周围的外缘培养基变成浑浊(蛋黄反应)
步骤:
1、将样品稀释在
2、将稀释样品加到培养基上
3、滴入蛋黄悬浮液
4、培养48小时
5、读取外缘培养基为白色浑浊的菌落

E. Compact Dry “Nissui”VP(肠道弧菌计数板)
性质:parahaemolyticus 弧菌产生蓝或蓝绿色菌落,产物中含有一种特殊的产色物质,其他的弧菌形成白色或无色的菌落
步骤:
1、将样品稀释在
2、将稀释样品加到培养基上
3、培养过夜
4、读取蓝或蓝绿色菌落即为parahaemolyticus 弧菌

F. Compact Dry “Nissui”YM(酵母及霉菌计数板)
性质:培养基中含有X-PHOS,使得多数酵母菌显蓝色,一部分显奶油色,抗生素抑制细菌生长,霉菌形成带特征色的毛状菌落
步骤:
1、将样品稀释
2、将稀释样品加到培养基上
3、培养3-7天
4、读取蓝至奶油色菌落即为酵母菌,带特征色的毛状菌落为霉菌

G. Compact Dry “Nissui”SL(沙门氏菌计数板)
性质:样品中的沙门氏菌由三种不同的实验原理共同分辨,通过沙门氏菌赖氨酸脱羧作用,培养基碱化,培养基由蓝紫色变为黄色,产色物质作用,菌落又变成绿色,随着氢硫化物的产生,菌落边黑色。

        

       

Nissui Compact Dry 培养板

货号  品名  用途  包装  保质期(1-30℃)
06740
Compact Dry TC 
菌落总数计数板 
40片 
18个月
06741
240片 
06744 
Compact Dry CF 
大肠菌群计数板 
40片 
06745 
240片 
06742 
Compact Dry EC 
大肠杆菌及大肠菌群计数板 
40片 
06743 
240片 
06734 
Compact Dry SA 
金黄色葡萄球菌计数板 
40片 
12个月
06735 
240片 
06748 
Compact Dry VP 
肠道弧菌计数板 
40片 
06749 
240片 
06746 
Compact Dry YM 
酵母及霉菌计数板 
40片 
06747 
240片 
06732 
Compact Dry SL 
沙门氏菌计数板 
40片 
06733
240片 

日水Nissui培养基的用途:可广泛用于活体菌总体计数、细胞培养、环境检测及食品卫生等。日水Nissui培养基的优势:日水Nissui培养基质量优越,技术领先,不但突破一般品牌无法高温灭菌的限制,特别在细胞培养的后期传代体现出其他品牌无法替代的优点。日水Nissui培养基的保证:所有培养基生产原料均由纯化学品经严格控制在无菌条件下制成,绝不含任何动物性的原料,是疫苗生产和细胞培养等生物制药的佳选择。

1. Food Hygienic Test (Dry Plate Media):

Code Product Name Application
06732 Compact Dry SL (40 plates) Salmonella detection
06733 Compact Dry SL (240 plates) Salmonella detection
06734 Compact Dry SA (40 plates)  Staphylococcus aureus
06735  Compact Dry SA (240 plates) Staphylococcus aureus
06738 Swab kit “Nissui” Easy swab kit Designed for Compact Dry
06740 Compact Dry TC (40 plates)  Total viable count
06741 Compact Dry TC (240 plates) Total viable count
06742 Compact Dry EC (40 plates) E. coli / Coliforms
06743  Compact Dry EC (240 plates) E. coli / Coliforms
06744  Compact Dry CF (40 plates) Coliforms
06745  Compact Dry CF (240 plates) Coliforms
06746 Compact Dry YM (40 plates) Yeast and Mold
06747 Compact Dry YM (240 plates) Yeast and Mold
06748 Compact Dry VP (40 plates) Vibrio parahaemolyticus
06749 Compact Dry VP (240 plates) Vibrio parahaemolyticus

2. Food Hygienic Test (Stamp Method):

 

Code Product Name Application
06050  Food Stamp Standard Method Agar (100plates) Total viable count
06051 Food Stamp Standard Method Agar (30 plates) Total viable count
06054 Food Stamp TCBS Agar (100 plates) Vibrio parahaemolyticus
06055 Food Stamp TCBS Agar (30 plates) Vibrio parahaemolyticus
06056 Food Stamp TGSE Agar (100 plates) Staphylococcus aureus
06057 Food Stamp TGSE Agar (30 plates) Staphylococcus aureus
06063 Food Stamp Sabouraud Agar (100 plates) Fungi
06064 Food Stamp Sabouraud Agar (30 plates) Fungi
06750 Food Stamp MLCB Agar (100 plates) Salmonella
06751 Food Stamp MLCB Agar (30 plates) Salmonella
06752 Food Stamp Cereus Agar (100 plates) Bacillus cereus
06753 Food Stamp Cereus Agar (30 plates) Bacillus cereus
06754 Food Stamp Potato dextrose Agar with CP (100plates) Food poisoning Fungi
06755 Food Stamp Potato dextrose Agar with CP (30plates) Food poisoning Fungi
06763  Food Stamp X-GAL Agar (100 plates) Coliforms
06764 Food Stamp X-GAL Agar (30 plates) Coliforms
06775 Food Stamp XM-G Agar (100 plates)  E. coli / Coliforms
06776 Food Stamp XM-G Agar (30 plates) E. coli / Coliforms

3. Food Hygienic Test (EVANET EV20 / EVATEST)

 

Code Product Name Application
01700 EVATEST SET (30 tests) Staphylococcal Enterotoxin
01702 EVATEST VT 1/2 (30 tests) EHEC Verotoxin
01300 EVANET EV20 (1 unit) Automated Fluorescent Immunoassay System

4. Environmental Test (for cleanliness check)

Code Product Name Application
09516 Lucifelight (50 det. X 4) For cleanliness check used ATP detection method
09518 Lucifelight Wiping Kit (200 tubes) For cleanliness check used ATP detection method
09534 Lucifelight LF-100 (1 unit) Instrument for Lucifelight

 

5. Environmental Test (Stamp Method)

 

Code Product Name Application
For Medical Environment
06780 Clean Stamp MSO Agar (100 plates) For MRSA
06781 Clean Stamp MSO Agar (30 plates) For MRSA
06782 Clean Stamp MSEY Agar (100 plates) For Staphylococcus
06783 Clean Stamp MSEY Agar (30 plates) For Staphylococcus
For Regular Environment
06784  Clean Stamp SCD Agar (100 plates) For Total viable count
06785 Clean Stamp SCD Agar (30 plates) For Total viable count
06786 Clean Stamp SCDLP Agar (100 plates) For Total viable count containing inactivator
06787 Clean Stamp SCDLP Agar (30 plates) For Total viable count containing inactivator
06790 Clean Stamp25 SCD Agar (100 plates) For Total viable count
06791 Clean Stamp25 SCD Agar (30 plates) For Total viable count
06792 Clean Stamp25 SCDLP Agar (100 plates) For Total viable count containing inactivator
06793 Clean Stamp25 SCDLP Agar (30 plates) For Total viable count containing inactivator
06794 Clean Stamp25 CPSB Agar (100 plates) For Fungi
06795 Clean Stamp25 CPSB Agar (30 plates) For Fungi

6. E. coli / Coliforms detection from Water

 

Code Product Name Application
05608 EC Blue 50P (100 packs for 50mL) For E. coli / Coliforms detection medium from Water
05611 EC Blue 50 (100 bottles for 50mL) For E. coli / Coliforms detection medium from Water
05613 EC Blue 10 (150 bottles for 10mL) For MPN (minimum probable number)

7. Food Allergen Detection Kit

 

Code Product Name Application
08600 FASTKIT ELISA “Egg” Kit For Food Allergen screening (Egg)
08601 FASTKIT ELISA “Milk” Kit For Food Allergen screening (Milk)
08602 FASTKIT ELISA “Wheat” Kit For Food Allergen screening (Wheat)
08603  FASTKIT ELISA “Buckwheat” For Food Allergen screening (Buckwheat)
08604 FASTKIT ELISA “Peanut” For Food Allergen screening (Peanut)

8. Colony counting

 

Code Product Name Application
01504 NeQCS (1unit) For automated colony counting

9. Culture Media (dehydrated)

 

Code Product Name Application
For Salmonella
05002  EEM Broth (100g) Enrichment broth for Salmonella
05020 SS Agar (20L) Isolation of Salmonella
05021 SS Agar (4L) Isolation of Salmonella
05032 SS Agar with Sucrose (280g) Isolation of Salmonella
05033 SS Agar with Sucrose (20L) Isolation of Salmonella
05131 Buffered Peptone Water (BPW) (300g)  Enrichment broth for Salmonella
For Staphylococcus
05234 Staphylococcus Medium No. 110 (300g) Isolation of Staphylococcus
05236 Mannitol Salt Agar (300g) Isolation of Staphylococcus
For E. coli / Coliforms
05036 MacConkey Agar (300g) Isolation of Enteric bacteria
05607  Blue Light Broth (300g) Rapid detection of E. coli and Coliforms from Water and Foods
05639  Lauryl Sulfate MUG Broth (300g) Rapid detection of E. coli and Coliforms from Water and Foods
05642 X-GAL Agar (300g) Chromogenic enzyme substrate agar for Coliform isolation
05643 MacConkey Sorbitol Agar (300g) Isolation for E. coli O157
05647 XM-G Agar (300g)  Chromogenic enzyme substrate agar for E. coli and Coliforms
For Bacillus cereus
05282 NGKG Agar Base (300g) Selective isolation of B. cereus from Foods
For Enterococci
05679 EF Agar Base (100g) Isolation of Enterococci from Water, Milk and Meat products
For general use
05503 Heart Infusion Agar (300g) Isolation for many kind of bacteria
05505 Heart Infusion Broth (100g) Isolation for many kind of bacteria
05506 Brain Heart Infusion Agar (300g) Isolation for many kind of bacteria
05508 Brain Heart Infusion Broth (300g) Isolation for many kind of bacteria
05516 Trypto-Soya Agar (SCD Agar) (300g)  Isolation for many kind of bacteria
05533 Mueller-Hinton Agar-N (300g) Isolation for many kind of bacteria
For Yeast and Mold
05701 Sabouraud Agar (300g) Isolation of Yeast and Mold
05703 Candida GE Agar (100g) Isolation for Candida
For Anaerobes
05426 GAM Agar, Modified (300g) Isolation for Anaerobic bacteria
05433 GAM Broth, Modified (100g) Isolation for Anaerobic bacteria
05440 Bacteroides Agar (100g) Differentiation and isolation for Bacteroides
05441 FM Agar (100g) Differentiation and isolation for Fusobacterium
06593 Anaero Mate-P (50 sets for 100 plates) Simple bag for Anaerobic culture
06594 Anaero Mate-J (50 sets for 500 plates) Simple bag for Anaerobic culture

10. Identification Test Kit

Code Product Name Application
06626 ID Test EB-20 (25 tests) Identification test for Enterobacteriaceae
06629 ID Test NF-18 (25 tests) Identification test for Gram Negative Non-fermenters
06637 ID Test SP-18 (25 tests) Identification test for Staphylococcus

BIO-RAD 伯乐 MSB1001 荧光定量PCR板封板膜

BIO-RAD 伯乐 MSB1001 荧光定量PCR板封板膜

产品介绍:

    Microseal“B”压片是一种带粘性的密封膜,适用于使用薄壁 PCR 反应板的热循环应用场合。 在热盖施加了足够的压力后,牢固的粘胶层可确保在循环前后安全地存储或运输样品,并确保在 PCR 期间进行严紧密封。 在半裙边PCR 反应板或自动化移板系统上使用此密封膜时,带穿孔的膜末端可移除。 可单独提供或作为光膜密封试剂盒的一部分提供,通过这种透明的聚脂膜,可检查样本孔并有效地传输光以进行光学测定(包括荧光定量 PCR)。 牢靠的粘性在 –40°C 至110°C 时都有效。这些压片不含 DNase、RNase 和人 DNA。
推荐对 CFX、iQ- 系列、Chromo4 和 DNA Engine Opticon 2 荧光定量 PCR 检测系统使用 Microseal“B”粘性压片。 为获得 Opticon 2 的较佳结果,请使用透光压力垫或光学级压片试剂盒:
光学压缩式防震垫(96 孔)— 增强了在荧光定量 PCR 检测系统中使用时 Microseal“B”透明压片的密封完整性
光学薄膜密封试剂盒 — 包含 100 个 Microseal“B”压片和一个光学压缩式防震垫

Choose Microseal ‘B’ Adhesive Sealing Films for all thermal cycling, including real-time PCR and next generation sequencing (NGS) applications. These peelable seals can be used for storage and transport of plates. Perforated end tabs can be removed when using this sealer with automated plate handlers.

  • Clear polyester for high sensitivity optical assays
  • Suitable for all PCR plates and automated plate handlers
  • Low volume PCR — down to 5 μl in 384-well plates, or 10 μl in 96-well plates
  • Adhesive effective down to –40°C
  • Free of DNase, RNase, and human DNA

BIO-RAD 伯乐 MSB1001 荧光定量PCR板封板膜

提供一系列薄膜,密封件和箔纸。为您的协议选择较好选项。

薄膜和箔 封口 光学(qPCR) 储存,最低温度 功能/用途 目录编号
微封’A’膜 压力  — 可剥的小体积PCR。样品运输的较好选择 MSA5001
微封’B’膜 胶粘剂 + –40°摄氏度 可剥离的小体积PCR,兼容自动平板处理机。NGS工作流程和qPCR的较好选择 MSB1001
微封’C’膜 压力 + –70°摄氏度 可剥,凸起的轮辋兼容 MSC1001
微封F箔 胶粘剂 –80°摄氏度 可剥离,可刺穿的自动化系统兼容。高抗DMSO MSF1001
光学透明热封§ 热封机 + –80°摄氏度 可剥,经qPCR验证 1814030
永久透明热封§ 热封机 –80°摄氏度 水浴循环,高抗DMSO 1814035
穿孔箔热封§ 热封机 –20°摄氏度 可刺穿,经过Droplet Digital PCR验证,具有较高的DMSO抗性 1814040
可剥箔热封§ 热封机 –200°摄氏度 可剥离,液氮储存兼容 1814045

BIO-RAD 伯乐 MSB1001 荧光定量PCR板封板膜  其他产品:

MLP9601 MULTIPLATE低位无裙边96孔PCR反应板,自然色 25块/盒
MSB1001 PCR反应板封膜 100张/PK
BC1202 O.2mL低位12联薄璧PCR管,带圆盖 1920个/PK
TBS0201 O.2mL 8联薄璧PCR管,无盖 1000个/PK
TBS1201 0.2mL 12联薄壁PCR管,无盖 1200个/PK
TCS0801 0.2mL低位8联薄璧PCR管盖,圆顶 120条/PK
TCS0803 0.2mL低位8联薄壁PCR管盖,平顶 120条/PK
TCS1201 0.2mL低位12联薄壁PCR管盖,圆顶 200条/PK
TFI0201 0.2mL薄壁PCR管,带平盖 1000个/袋
TLS0801 0.2mL低位8联薄壁PCR管,无盖,自然色 120条/PK
TLS0851 0.2mL低位8联薄壁PCR管,无盖,白色 120条/PK
TWI0201 0.2mL薄璧PCR管,带圆盖 1000个/袋
2239441 iQ 96-WELL PCR PLATES iQ96孔PCR板 25块/盒
1708880 iQ SYBR GREEN SUPERMIX iQ SYBR GREEN超混合液 KIT

Hampton蛋白结晶工具

Hampton蛋白结晶工具

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™ – 20 micron

HR4-974 18 mm Mounted CryoLoop 0.7 - 1.0 mm

HR4-974

Mounted CryoLoop™ – 20 micron

APPLICATIONS

  • Cryocrystallography

HR4-965 Mounted CryoLoop 0.7 - 1.0 mm

HR4-965

Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

HR4-994 Mounted CryoLoop 0.025 - 0.05 mm

CAT NO NAME DESCRIPTION
HR4-994 Mounted CryoLoop – 10 micron 0.025-0.05 mm – 25 pack
HR4-995 Mounted CryoLoop – 10 micron 0.05 – 0.1 mm – 25 pack
HR4-997 Mounted CryoLoop – 10 micron 0.1 – 0.2 mm – 25 pack
HR4-999 Mounted CryoLoop – 10 micron 0.2 – 0.3 mm – 25 pack

Adjustable Mounted CryoLoop™ with EasySnap MicroTube

HR8-110 Adjustable Mounted CryoLoop 0.7 - 1.0 mm

Applications
Cryocrystallography
Features
Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description 
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.

Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.

CAT NO NAME DESCRIPTION
HR4-338 Adjustable Mounted CryoLoop 0.05 – 0.1 mm – 25 pack
HR5-900 Adjustable Mounted CryoLoop Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)
HR4-336 Adjustable Mounted CryoLoop 0.025 – 0.05 mm – 25 pack
HR8-102 Adjustable Mounted CryoLoop 0.1 – 0.2 mm – 25 pack
HR8-072 Adjustable Mounted CryoLoop 0.2 – 0.3 mm – 25 pack
HR8-104 Adjustable Mounted CryoLoop 0.3 – 0.4 mm – 25 pack
HR8-106 Adjustable Mounted CryoLoop 0.4 – 0.5 mm – 25 pack
HR8-108 Adjustable Mounted CryoLoop 0.5 – 0.7 mm – 25 pack
HR8-110 Adjustable Mounted CryoLoop 0.7 – 1.0 mm – 25 pack

Hampton蛋白结晶小瓶和结晶瓶帽 CrystalCap™

CrystalCap™ ALS

Applications  应用
Cryocrystallography   低温晶体学
Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状

Description 
The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.

ALS style sample mounters accept the CrystalCap ALS.

HR4-779    CrystalCap ALS     without Vial – 60 pack

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

CrystalCap

APPLICATIONS

  • Cryocrystallography

FEATURES

  • SSRL style sample mount for cryocrystallography
  • CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers
CAT NO NAME DESCRIPTION
HR4-733 CrystalCap with Vial – 60 pack
HR4-902 CrystalCap without Vial – 60 pack
HR4-904 CrystalCap Vial Vial only – 30 pack

CrystalCap & Vial

Hampton CrystalCap™ SPINE HT

Applications  应用
Cryocrystallography   低温晶体学

Features   特征
SPINE style sample mount for cryocrystallography
CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base

Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers

2D alphanumeric coding for sample tracking & management
Bar coded, color coded, alphanumeric, magnetic cap
Color coded CryoLoop size

用于低温晶体学的 SPINE 型样品架
CrystalCap SPINE HT 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座

镂空设计与 SPINE 型夹持器、自动贴片机和样品处理器兼容

用于样本跟踪和管理的 2D 字母数字编码
条形码、颜色编码、字母数字、磁性帽
颜色编码的 CryoLoop 尺寸

Description
The CrystalCap SPINE HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SPINE style caps. The CrystalCap SPINE HT attaches to a magnetic CrystalCap SPINE Vial and magnetic goniometer base. The tip of the CrystalCap SPINE HT accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap SPINE Vial is a 1.8 ml cryo vial featuring two small vents and is compatible with the CrystalCap SPINE HT. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The CrystalCap SPINE Vial features chamfered edges for enhanced cap positioning as well as a magnetic alloy bottom for stability. The HR8-114 CrystalCap SPINE Vial does have a magnet on the bottom of the vial.

The hollowed out design of the CrystalCap SPINE HT is compatible with SPINE style grippers, auto mounters and sample handlers.

The CrystalCap SPINE HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-118 CrystalCap SPINE HT 0.025-0.05 mm CryoLoop, without Vial – 30 pack
HR8-120 CrystalCap SPINE HT 0.05-0.1 mm CryoLoop, without Vial – 30 pack
HR8-122 CrystalCap SPINE HT 0.1-0.2 mm CryoLoop, without Vial – 30 pack
HR8-124 CrystalCap SPINE HT 0.2-0.3 mm CryoLoop, without Vial – 30 pack
HR8-126 CrystalCap SPINE HT 0.3-0.4 mm CryoLoop, without Vial – 30 pack
HR8-128 CrystalCap SPINE HT 0.4-0.5 mm CryoLoop, without Vial – 30 pack
HR8-130 CrystalCap SPINE HT 0.5-0.7mm CryoLoop, without Vial – 30 pack
HR8-132 CrystalCap SPINE HT 0.7-1.0 mm CryoLoop, without Vial – 30 pack
HR8-112 CrystalCap SPINE HT Cap only – 30 pack
HR8-116 CrystalCap SPINE HT Cap/Vial Cap/Vial only – 30 pack
HR8-094 CrystalCap SPINE without 2D code/printing Cap only – 30 pack
HR8-114 CrystalCap SPINE Vial Vial only – 30 pack

CrystalCap™ ALS HT

Applications  应用

Cryocrystallography  低温晶体学

Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Color coded CryoLoop size

用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS HT 磁性连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状
用于样本跟踪和管理的 2D 字母数字编码
颜色编码的 CryoLoop 尺寸


Description
The CrystalCap ALS HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS HT attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS HT is compatible with ALS style grippers, auto mounters and sample handlers.

The CrystalCap ALS HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-200 CrystalCap ALS HT 0.025-0.05 mm CryoLoop – 30 pack
HR8-202 CrystalCap ALS HT 0.05-0.1 mm CryoLoop – 30 pack
HR8-204 CrystalCap ALS HT 0.1-0.2 mm CryoLoop – 30 pack
HR8-206 CrystalCap ALS HT 0.2-0.3 mm CryoLoop – 30 pack
HR8-208 CrystalCap ALS HT 0.3-0.4 mm CryoLoop – 30 pack

Hampton 石英毛细管 Quartz Capillaries

Applications  应用

X-ray data collection   X射线数据采集
Liquid-liquid diffusion crystallization  液-液扩散结晶
Gel acupuncture crystallization  凝胶针灸结晶

Features  特征
Quartz  石英
Thin walled – 10 micron  薄壁 – 10 微米

CAT NO NAME DESCRIPTION
HR6-128 Quartz Capillary Size: 0.1 mm – 25 pack
HR6-130 Quartz Capillary Size: 0.2 mm – 25 pack
HR6-132 Quartz Capillary Size: 0.3 mm – 25 pack
HR6-134 Quartz Capillary Size: 0.4 mm – 25 pack
HR6-136 Quartz Capillary Size: 0.5 mm – 25 pack
HR6-138 Quartz Capillary Size: 0.6 mm – 25 pack
HR6-140 Quartz Capillary Size: 0.7 mm – 25 pack
HR6-142 Quartz Capillary Size: 0.8 mm – 25 pack
HR6-144 Quartz Capillary Size: 0.9 mm – 25 pack
HR6-146 Quartz Capillary Size: 1.0 mm – 25 pack
HR6-148 Quartz Capillary Size: 1.5 mm – 25 pack
HR6-150 Quartz Capillary Size: 2.0 mm – 25 pack
HR6-151 Quartz Capillary Size: 2.5 mm – 15 pack
HR6-175 Quartz Capillary Size: 3.0 mm – 15 pack
HR6-177 Quartz Capillary Size: 4.0 mm – 5 pack
HR6-179 Quartz Capillary Size: 5.0 mm – 5 pack
低温泡沫杜瓦瓶 Spearlab Cryogenic Foam Dewars

Applications 应用

Cryocrystallography 蛋白结晶学

Spearlab Dewars
HR4-676 Cryogenic Foam Dewar (130 ml) – Mini each
HR4-662 Cryogenic Foam Dewar (500 ml) – Small each
HR4-673 Cryogenic Foam Dewar (800 ml) – Standard each
HR4-674 Cryogenic Foam Dewar (1400 ml) – Large each
HR4-675 Cryogenic Foam Dewar (2 liter) – Tall each

Hampton 结晶板封口膜 ClearSeal Film™ and Applicator

Applications 应用

Sealing film used to seal sitting drop crystallization experiments  使用密封膜来密封座滴板结晶实验

Features  特征
1.High optical clarity, low auto-fluorescence
2.Easy to handle film; easy to remove liner
3.Pressure sensitive adhesive
4.For best results use specially designed applicator
5.UV transmissable, compatible with UV imaging systems
6.Low birefringence
7.Certified DNase-, RNase-, and nucleic-acid-free
8.Silicone adhesive is non-tacky until pressed against the sealing surface with the applicator
9.Chemically inert; no extractable except at extreme pH
10.Excellent chemical resistance (e.g. DMSO, Methanol, Acetonitrile)
11.Heat and cold resistant, recommended for temperatures from -70°C and 110°C

特征
高光学透明度、低自体荧光
膜易于处理 ;易拆卸衬垫
压力敏感粘合剂
为了获得佳效果 , 请使用专门设计的涂抹器
传染性紫外、紫外成像系统兼容
低双折射
认证 DNase – , RNase – , 和核酸的游离
硅酮粘合剂是无粘性的 , 直到压在密封表面与涂抹器
化学惰性的 ;除了极端 pH 不能提取优异的耐化学性 (如。DMSO 、甲醇、乙腈)
耐热耐寒 , 温度从 – 70 ° C 至 110 ° C

Crystal Clear Sealing Film

APPLICATIONS  应用

  • Sealing film used to seal sitting drop crystallization experiments

密封膜用于密封坐滴结晶实验

FEATURES   特征

  • Fits SBS format microplates
  • No special applicator required
  • Optically clear

适合 SBS 格式的微孔板
无需特殊涂抹器
光学透明

DESCRIPTION  描述

Crystal Clear Sealing Film is an optically transparent sealing film for SBS format 24, 48, 96 and 384 well plates. The 2 mil +/-10% (0.05 mm) thick, optically clear, non-fluorescing polyester film with 1.0 – 1.3 mil (0.025 mm) thick acrylic custom adhesive is designed for the convenient and secure sealing of crystallization plates. A split, optically opaque 2.0 mil +/-10% polyester backing with two end tabs assures a clean uniform adhesive layer and allows for easy, accurate positioning on the plate. Before use, peel off the opaque center protective polyester backing to reveal the optically clear sealing film. Film length: 5.625″ +/- 0.015 Film width: 3.125″ +/- 0.015 End tabs: 0.375″ +/- 0.015 Perforations: 0.415″ +/- 0.015 from edge of film Corner radius: 3/32″. Free of detectable levels of DNase-, RNase- and Human/Mouse DNA contamination (PCR Certified), non-sterile. Recommended temperatures from -40 to +120°C. Not recommended for UV imaging.

Crystal Clear Sealing Film 是一种光学透明密封膜,适用于 SBS 格式 24、48、96 和 384 孔板。 2 mil +/-10% (0.05 mm) 厚、光学透明、无荧光的聚酯薄膜和 1.0 – 1.3 mil (0.025 mm) 厚的丙烯酸定制粘合剂专为方便和安全地密封结晶板而设计。带有两个末端标签的分离、光学不透明的 2.0 mil +/-10% 聚酯背衬可确保清洁均匀的粘合剂层,并允许在板上轻松、准确地定位。使用前,撕下不透明的中央保护聚酯背衬,露出光学透明的密封膜。胶片长度:5.625″ +/- 0.015 胶片宽度:3.125″ +/- 0.015 端片:0.375″ +/- 0.015 穿孔:距胶片边缘 0.415″ +/- 0.015 角半径:3/32″。不可检测DNase-、RNase- 和人类/小鼠 DNA 污染(PCR 认证)的水平,非无菌。推荐温度为 -40 至 +120°C。不推荐用于紫外线成像。

Film Sealing Paddle  薄膜密封辅助板

APPLICATIONS  应用

  • Even and secure application of sealing films to crystallization plates   将密封膜均匀且安全地应用到结晶板上

FEATURES  特征

  • White, polyethyelene plastic
    • 5 paddles per pack
    • 2.958″ short side width, 3.250″ long side width, 0.125″ thick
    • Less firm than gold paddle
  • 白色,聚乙烯塑料
    每包 5 个桨
    2.958″ 短边宽,3.250″ 长边宽,0.125″ 厚
    不如金桨结实
  • Gold, plastic, nylon reinforced edge
    • 1 paddle per pack
    • 3 7/8″ wide x 2 15/16″ tall
    • More firm than white paddle
  • 金色、塑料、尼龙加强边
    每包 1 个桨
    3 7/8 英寸宽 x 2 15/16 英寸高
    比白桨更结实

HR4-413 Film Sealing Paddle – White 5 pack
HR4-525 3M Sealing Paddle – Gold Each

Hampton 石蜡和硅润滑油 Paraffin & Silicon Oil

Applications  应用
Microbatch crystallization    microbatch 结晶
Features  特征
Under oil crystallization 在油中结晶
Protect the sample from oxidation  保护样品免于氧化
Screen different temperatures without condensation   屏幕不同温度下不凝结
Description   描述 
Oils used for microbatch and modified microbatch crystallization under oil.

使用的油和改性 microbatch microbatch 结晶油。

Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.

Al 是机油的 50 ∶ 50 (体积 ∶ 体积) 混合物的石蜡油和硅油。Al 的石油是其发明者的名字命名 , Allan D ‘Arcy) 。

Silicon Oil

Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C

Silicon Oil 
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m

Vial Clamp™ – Straight
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.
HR4-670 Vial Clamp - Straight
HR4-670 Vial Clamp – Straight 结晶瓶夹子 each
CrystalWand™ Magnetic
Applications
CrystalCap Magnetic & CrystalCap Copper Magnetic handling tool
结晶帽磁性&结晶帽铜磁性处理工具
Description
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.
HR4-729 CrystalWand Magnetic, Straight
HR4-315 CrystalWand Magnetic, 45° (McMiken Tool)
 
Vial Clamp™ – Curved
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.
HR4-671 Vial Clamp – Curved 45°/135°
HR4-672 Vial Clamp – Curved 110°/70°
Cap Container (empty)

Applications

Holds 30 CrystalCap caps for storage or transport
Features
Black polypropylene box with overlap snap closure
Holds 30 caps with or without Mounted CryoLoops™
Description 
Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.

HR8-016 Cap Container Opened

HR8-016 Cap Container empty  底座盒子 each

18 mm Siliconized Glass Cover Slides

APPLICATIONS 应用

  • Siliconized glass cover slides for hanging & sitting drop crystallization
  • Hanging drop crystallization
  • Sitting drop crystallization
  • Sandwich drop crystallization

用于悬挂和坐滴结晶的硅化玻璃盖玻片
悬滴结晶
坐滴结晶
夹心滴结晶

FEATURES  特征

  • High purity of glass
  • Siliconized, hydrophobic glass surface
  • 0.22 mm & 0.96 mm glass thickness
  • 18 mm glass diameter
  • Circle
  • 0.22 mm glass thickness is UV Compatible (>85% transmission)

玻璃纯度高
硅化疏水玻璃表面
0.22 毫米和 0.96 毫米玻璃厚度
18 毫米玻璃直径
圆圈
0.22 毫米玻璃厚度与紫外线兼容(> 85% 透射率)

12 mm Siliconized Glass Cover Slides HR3-278T Siliconized circle cover slides for Tecan robot
HR3-277 12 mm x 0.22 mm Siliconized circle cover slides
HR3-279 12 mm x 0.22 mm Siliconized circle cover slides
HR8-088 12mmx0.96mmThick Siliconized circle cover slides
HR8-090 12mmx0.96mm Thick Siliconized circle cover slides
22 mm Siliconized Glass Cover Slides HR3-231 22 mm x 0.22 mm Siliconized circle cover slides
HR3-233 22 mm x 0.22 mm Siliconized circle cover slides
HR3-247 22 mm x 0.96 mm Thick Siliconized circle cover slides
HR3-249 22mmx 0.96mm Thick Siliconized circle cover slides
HR3-215 22 mm x 0.22 mm Siliconized square cover slides
HR3-217 22 mm x 0.22 mm Siliconized square cover slides
HR3-223 22mmx0.96mm Thick Siliconized square cover slides
HR3-225 22mmx0.96mm Thick Siliconized square cover slides

Hampton 水晶透明密封带Crystal Clear Sealing Tape

3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)

Hampton HR4-316胶 Super Glue

Loctite® Easy-Squeeze Super Glue Gel

APPLICATIONS

  • Staking Glass Fibers to Brass Specimen Pins.
  • Staking MicroTube to CrystalCap

FEATURES

  • Squeeze grips allow for precise application, keeping fingers glue free
  • Locking cap collar prevents leaks and drying out
  • Bonds more surfaces than ordinary glues, including: metal, CryoLoops, wood, paper, cardboard, vinyl, leather, rubber, cork, ceramic, china, textiles, brick and fingers.

CryoTong™ – Long
Applications

Crystal transfer under cryo temperature
Features

Artery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.

CrystalCap™ Holder
applications
CrystalCap support inside stainless steel dewars
Features
Adjustable heightSupports up to 8 CrystalCaps15 ml vial position for liquid propane500 and 1,000 ml versionsDescription
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.
HR4-707 CrystalCap Holder – 500 ml
HR4-706  Replacement Height Adjustment Tool

Harlan Teklad TD.09073 磷元素调节饲料 Phos. Adj. Diet

Harlan Teklad TD.09073 磷元素调节饲料 Phos. Adj. Diet

Harlan代理–上海金畔生物科技有限公司
欢迎新老客户访问Harlan官网或者咨上海金畔生物获取更多详细资料。

Harlan Teklad TD.09073 Phos. Adj. Diet (0.6% Ca, 0.2% P)饲料

Formula   g/Kg
Egg White Solids, spray-dried   200.0
L-Tryptophan 1.6
Corn Starch 150.0
Sucrose 558.177
Corn Oil 50.0
Vitamin Mix, Teklad (40060) 10.0
Biotin 0.004
Mineral Mix, Ca-P Deficient (79055) 13.369
Calcium Phosphate, dibasic 7.8
Calcium Carbonate 8.95
Orange Food Color 0.1
Footnote
Modification of TD.80235. Approx 0.6% Ca and 0.2% P. Color coded orange.
Selected Nutrient Information1
  % by weight % kcal from
Protein 16.3 16.7
Carbohydrate 69.7 71.7
Fat 5.0 11.6
Kcal/g 3.9

1 Values are calculated from ingredient analysis or manufacturer data

 

三菱化学 AQUAMICRON 卡尔费歇尔试剂目录

三菱化学 AQUAMICRON 卡尔费歇尔试剂目录

有两种类型的库仑试剂:电解池阳极室中的阳极电解液(生成溶液);以及阴极室中的阴极电解液(逆电解液)。此外还有专门用于酮类、低羟基酸和硅油的阳极电解液。AQUAMICRON®可以用于许多公司售的库仑水分测量系统,性能卓著,享誉全球。

品名 代码 规格 包装 主要溶剂 用途
AQUAMICRON®
AX
XAMA 最大水分
0.15mgH2O/mL
500mL
玻璃瓶
甲醇,
碳酸丙烯酯
【一般用途】
有机溶剂,无机物化学品,油类,
石油产品,各种汽油等。
AQUAMICRON®
AX01
XAMA01 100mL
玻璃瓶
AQUAMICRON®
AS
SAMA 最大水分
0.15mgH2O/mL
500mL
玻璃瓶
甲醇,氯仿 【用于油类】
石脑油,汽油,柴油,绝缘油等。
AQUAMICRON®
AKX
AKX 最大水分
0.15mgH2O/mL
500mL
玻璃瓶
碳酸丙烯酯,
二甘醇一甲醚
【用于酮类】
酮类,硅油,低羟基酸等。
AQUAMICRON®
CXU
CXU 最大水分
0.6mgH2O/mL
5mL安瓿
×10/盒
甲醇 【阴极电解液】
AX和AKX都可以结合。
AQUAMICRON®
FLS
FLS 最大水分
0.15mgH2O/mL
500mL
玻璃瓶
甲醇,
碳酸丙烯酯
【适用于无玻璃型电解池】
有机溶剂,无机气体等。

AQUAMICRON® AX/CXU

用途 一般试样
特性 最小限度环境污染 • 不含四氯化碳或氯仿
用途广泛 • 适用于石油产品
• 可以用于水分汽化方法(AQUAMICRON® AX用于水分汽化法时,用甲醇补充已经汽化的部分。)
高质量,高性能 • 因精确测定水分及终点稳定而声誉卓著。
用100mL的AQUAMICRON® AX可以测定大约800mg的水分。用5mL的AQUAMICRON® CXU可以测定大约150mg的水分。
易于使用 • 这些产品可以在现有库仑水分测量系统中使用。

AQUAMICRON® AS/CXU

用途 油类,一般试样
特性 用途广泛 • 尤其适用于油类,石油产品。
高质量,高性能 • 因精确测定水分及终点稳定而声誉卓著。
• 用100mL的AQUAMICRON® AS可以测定大约800mg的水分。
• 用5mL的AQUAMICRON® CXU可以测定大约150mg的水分。
易于使用 • 这些产品可以在现有库仑水分测量系统中使用。

 

AQUAMICRON® AKX/CXU

用途 酮类,低羟基酸,某些醛类(芳族化合物)
特性 最小限度环境污染 • 不含氯仿或甲基溶纤剂
用途广泛 • 适用于酮类、低羟基酸及一些醛类
高质量,高性能 • 因精确测定水分及终点稳定而声誉卓著。
• 用100mL的AQUAMICRON® AKX可以测定大约300mg的水分;
用5mL的AQUAMICRON® CXU可以测定大约100mg的水分(与AQUAMICRON®AKX一起使用时)。
易于使用 • 这些产品可以在现有库仑水分测量系统中使用。

 

AQUAMICRON® FLS

用途 适用于酒精,酯类,苯,甲苯,无机气体等。
特性 易于使用 • AQUAMICRON® FLS是一种单溶液型试剂。应在无隔膜的单溶液电解池和无玻璃型电解池中使用。
• 可以用于水分汽化法(AQUAMICRON® FLS用于水分汽化法时,用甲醇补充已经汽化的部分。)
易于使用 • 没有使用陶瓷隔膜,因而方便维护电解池于良好状态。

日本柴田科学SIBATA 高体积空气采样器HV-500R、HV-500R-4S型

日本柴田科学SIBATA 高体积空气采样器HV-500R、HV-500R-4S型

High Volume Air Sampler,Model HV-500R,HV-500R-4S

高体积空气采样器HV-500R型是一种专为抽吸量100~800L/min设计的装置,可实现现场采集、测量和移动的小型化。★与惯性碰撞分粒机和梭管等多种选项相结合,可作为工作环境和大气环境中的空气取样器使用。

用途:用途
工厂等作业现场的粉尘测量。
焚烧炉中的二恶英采样。
废弃物焚烧设施拆除工程的二恶英类。

特征:特征
通过恒定流量装置,抑制了采集量增加引起的吸引流量的降低。
数字显示累计流量、吸引压力和瞬时流量。
采用无刷电机,控制发尘。
实施了噪音对策。
通过使用可选适配器,还可以安装用于二恶英采样的梭管。
与可选分粒机的组合,还可以对10µm或更多100%切割的分粒特性进行采样。

品种代码. 080130-31
类型(类型) HV-500R(粉尘用)
分粒特性 开放的面孔。
抽吸泵 无刷鼓风机
流量检测;流量检测 差压检测方法
吸引压力. -160hPa(500L/min)
停电处理. 停电恢复后,继续停电前的动作状态
流量精度: 相对于设定流量值在±5%以内
质量(质量) 约8.0公斤
吸引流量. 500L/min(Φ110 mm玻璃纤维过滤器,安装1片时)
显示单元显示单元 触摸屏液晶屏(带背光)
动作环境;动作环境 0~40℃
电源 AC100V 50/60 Hz 10A
主体尺寸(尺寸) 425(W)×200(D)×270(H)mm
附件(附件) 滤纸滤纸夹1式
Φ110 mm玻璃纤维过滤器
GB-100R-110A(10张)
价格(不含税) 520,000日元
备考 ※瞬时流量、累计流量自动修正为25℃、1气压的值。(也可以修正为20℃、1个大气压或实际流量。)☆※HV-500R-4S的可追溯性成为HV-500R的追溯性。☆※装置内吸入空气温度达到高温时,温度保护装置启动,停止鼓风机马达。

可选产品/备件

用于HV-500R/HV-500F的SPM分粒机圆形过滤器
080130-042
HV-500R/HV-500F用PM10分粒装置
080130-045
HV-500R/HV-500F用PM4分粒装置
080130-0874
HV-500R/HV-500F用PM2.5分粒装置
080130-047
HV-500R/HV-500F用油脂指南
080130-037
HV-500R/HV-500F过滤器外壳盖
080130-035A
格里斯:格里斯。
080130-036
穿梭管(梭管)
080130-0971
聚氨酯支架(Holder)
080130-0972
夹紧钳
080130-0994
梭管安装部件组
080130-0872
方形过滤器支架
080130-0873
聚氨酯泡沫(聚氨酯泡沫)
080130-0941A
数字孔流量计OFD-1型
080130-8
用于Orifos适配器圆形分粒机
080130-0553
HV-500R/HV-500RD型专用泄漏检查用橡胶板(HV圆形)
080130-0904
PTFE粘合剂过滤器TF98Rφ110 mm 50片
080130-098110

日本柴田SIBATA OFD-1 型数字孔板流量计(扬尘大流量)

日本柴田SIBATA OFD-1 型数字孔板流量计(扬尘大流量)

数字孔流量计OFD-1型

Digital Orifice Flow meter,for HV Air Samplers,Model OFD-1

高体积空气采样器的流量校准是在标准流量计(罗茨计)中完成的。罗茨计是安装型的,不能在测量现场进行流量校准。★数字节流孔流量计OFD-1型是高体积空气采样器HV-500F/-500R/-700F/-700R/-1000F/-1000R/-RW型测量现场对应用的流量校准器。采用传统的玻璃U形管的节流流量计为传感器式,加上大气压计、温度计,可以直接使用所显示的数值进行高音量空气取样器的校准,而无需在客户端进行换算。此外,高体积空气采样器HV-R系列可实现自动校准,从而更轻松、快速地进行现场流量校准。

特征:特征
配备温度传感器、大气压传感器,自动进行流量换算。
HV-R系列/HV-RW型和USB电缆连接,可进行自动校准。
可以自动识别孔板(两种),没有错误。
可追溯性的获取。(仅流量)
OFD-1型号连接到高容量空气采样器时,需要单独销售的适配器。使用HV-1000F/-1000R/-700F/-700R/-RW型时请购买方形适配器,使用HV-500F/-500R型时请另外购买圆形适配器。(如果您有一套旧式节流孔流量计,您可以使用附带的适配器。)

品种代码. 080130-8
类型(类型) OFD-1
流量检测;流量检测 差压检测方法
流量精度: 相对于测量流量±3%
对应的机种 HV-F系列/HV-R系列
通信功能: USB(HV-R系列自动校准专用)▲2
设定流量范围 90~1300L/min▲1
质量(质量) 约2.0公斤
动作环境;动作环境 0~40℃10~90%rh(无结露)
电源 碱性AA干电池4根(8小时以上驱动)▲3
AC适配器(可选)
尺寸:尺寸 105(W)×225(D)×180(H)mm
附件(附件) 2片孔板2片AA干电池4根(动作确认用)
备考 ※1流量可以用标准温度(20℃,25℃,0℃)·1气压换算及实际流量表示。☆※2不附带USB电缆。使用自动校准时,请提供市售的A-B型电缆。☆※3碱性AA干电池,是在25℃环境下连续工作的标准。☆※不附带方形适配器或圆形适配器。使用OFD-1型号时,需要方形适配器或圆形适配器。请另外购买。

可选产品/备件

孔口流量计的方形适配器
080130-0551
圆形适配器节流孔流量计
080130-07511
软壳OFD-1型用
080130-81
交流适配器(AC适配器)
080040-3212
用于Orifos适配器圆形分粒机
080130-0553

日本Advantec A045A142C混合纤维素滤膜

日本Advantec A045A142C混合纤维素滤膜

日本ADVANTEC 混合纤维素滤膜A045A142C 0.45UM

1.高孔率:微孔分布在80%的表面,流速佳。
2.热稳定:耐热130℃高压灭菌。
3.不含Triton及与热原(Pyrogens)反应的物质。
4.透光性佳:以R.I.值1.50之溶液如Immersion Oil(浸油)或Toluene(甲苯)润湿过
滤膜,即可用显微镜观察过滤膜上的粒子。
5.灰份含量:0.002mg/cm2至0.005mg/cm2,如欲灰化处理,请先用酒精润湿过滤膜,
以避免样品损失。

Membrane filter A045A013A (100 sheets)
10040001

Membrane filter A045A025A (100 sheets)
10040002

Membrane filter A045A047A (100 sheets)
10040004

Membrane filter A045A090C (25 sheets)
10040009

Membrane filter A045A142C (25 sheets)
10040014

Membrane filter A045A293H (25 sheets)
10040028

Membrane filter A045A293C (25 sheets)
10040029

Membrane filter A045A090A (100 sheets)

编号               孔径         颜色          尺寸         包装
A500A013A          5.00μm       白色          Ф13mm        100
A500A025A          5.00μm       白色          Ф25mm        100
A500A047A          5.00μm       白色          Ф47mm        100
A500A090C          5.00μm       白色          Ф90mm        25
A500A142C          5.00μm       白色          Ф142mm       25
A500A293C          5.00μm       白色          Ф293mm       25
A300A013A          3.00μm       白色          Ф13mm        100
A300A025A          3.00μm       白色          Ф25mm        100
A300A047A          3.00μm       白色          Ф47mm        100
A300A090C          3.00μm       白色          Ф90mm        25
A300A142C          3.00μm       白色          Ф142mm       25
A300A293C          3.00μm       白色          Ф293mm       25
A100A013A          1.00μm       白色          Ф13mm        100
A100A025A          1.00μm       白色          Ф25mm        100
A100A047A          1.00μm       白色          Ф47mm        100
A100A090C          1.00μm       白色          Ф90mm        25
A100A142C          1.00μm       白色          Ф142mm       25
A100A293C          1.00μm       白色          Ф293mm       25
A080A013A          0.80μm       白色          Ф13mm        100
A080A025A          0.80μm       白色          Ф25mm        100
A080A047A          0.80μm       白色          Ф47mm        100
A080A090C          0.80μm       白色          Ф90mm        25
A080A142C          0.80μm       白色          Ф142mm       25
A080A293C          0.80μm       白色          Ф293mm       25
A065A013A          0.65μm       白色          Ф13mm        100
A065A025A          0.65μm       白色          Ф25mm        100
A065A047A          0.65μm       白色          Ф47mm        100
A065A090C          0.65μm       白色          Ф90mm        25
A065A142C          0.65μm       白色          Ф142mm       25
A065A293C          0.65μm       白色          Ф293mm       25
A045A013A          0.45μm       白色          Ф13mm        100
A045A025A          0.45μm       白色          Ф25mm        100
A045A047A          0.45μm       白色          Ф47mm        100
A045A090C          0.45μm       白色          Ф90mm        25
A045A142C          0.45μm       白色          Ф142mm       25
A045A293C          0.45μm       白色          Ф293mm       25
A030A013A          0.30μm       白色          Ф13mm        100
A030A025A          0.30μm       白色          Ф25mm        100
A030A047A          0.30μm       白色          Ф47mm        100
A030A090C          0.30μm       白色          Ф90mm        25
A030A142C          0.30μm       白色          Ф142mm       25
A030A293C          0.30μm       白色          Ф293mm       25
A020A013A          0.20μm       白色          Ф13mm        100
A020A025A          0.20μm       白色          Ф25mm        100
A020A047A          0.20μm       白色          Ф47mm        100
A020A090C          0.20μm       白色          Ф90mm        25
A020A142C          0.20μm       白色          Ф142mm       25
A020A293C          0.20μm       白色          Ф293mm       25
A010A013A          0.10μm       白色          Ф13mm        100
A010A025A          0.10μm       白色          Ф25mm        100
A010A047A          0.10μm       白色          Ф47mm        100
A010A090C          0.10μm       白色          Ф90mm        25
A010A142C          0.10μm       白色          Ф142mm       25
A010A293C          0.10μm       白色          Ф293mm       25

Amersham 带正电荷尼龙膜 Hybond-N+ (30 cm * 3 m)

Amersham 带正电荷尼龙膜 Hybond-N+ (30 cm * 3 m)

Amersham Hybond-N+ 带正电荷尼龙膜 0.45um 30cmx3m RPN303B
带正电荷的尼龙膜与核酸高达600μg/cm2的结合能力。建议使用放射性和非放射性的化学发光法和chemifluorescence检测系统。
Amersham公司Hybond™- N +产品在传统的Southern杂交有着出色的灵敏度。核酸样品可能是固定的,通过紫外线照射或烘烤,虽然紫外线固定是最好的最大的重复性。Hybond N +是不适合碱印迹和固定。

Amersham Hybond-N是一种坚固的支撑膜,具有固有的亲水性,无需预润湿。 紫外光照时可以快速、轻松地将核酸与尼龙膜交联起来。 使用缓冲液体积较少时,建议使用Hybond-NX。

Amersham Hybond™-N+

  • Positively charged nylon membrane with a binding capacity for nucleic acids up to 600 µg/cm2¾recommended for use with radioactive or nonradioactive chemiluminescence and chemifluorescence detection systems.
  • Recommended for all high density membrane arrays.

Technical Information

Amersham Hybond™-N+ yields excellent sensitivity in conventional Southern blotting. Nucleic acid samples may be fixed by UV exposure or baking, although UV fixation is best for maximum reproducibility. Hybond-N+ is not suitable for Alkali blotting and fixation.

  • Multiple reprobing is possible without loss of membrane integrity.
  • QC tested in genomic Southern blots using GE Healthcare products.
  • Special sizes available on request.

Human genomic DNA (1, 0.5, 0.125, 0.06 and 0.03 µg loadings) digested with HindIII and transferred to Hybond-N+. Hybridizaton with A. N-ras, B. p53, and C. bcl-2 labeled DNA probes and detected using Gene Images™ random-prime labeling with CDP-Star™ detection.

Membranes should be stored at room temperature in a clean dry atmosphere away from excessive heat, light, and noxious fumes. To prevent contamination, handle membranes using gloves or blunt-ended forceps. Hybond-N+ is stable for up to 3 years. Membranes should be kept in the bags in which they are received. Performance is consistent when stored under the recommended conditions.

TECHNICAL SPECIFICATIONS
Pore size 0.45 µm
Nucleic acid size required > 50 bp

三菱化学色谱柱MCI GEL CK08EH 5UM 8X300MM

三菱化学色谱柱MCI GEL CK08EH 5UM 8X300MM

三菱化学–MITSUBISHI CHEMICAL

Column Selection Guide

The appropriate type of MCI GEL™ packed column for a specific application can be selected according to the molecular weight, hydrophilicity, and ionic property of the analytes

色谱柱选择指南
可根据分析物的分子量、亲水性和离子特性选择适合特定应用的 MCI GEL™ 填充柱类型

Nature of sample Separation mode MCI GEL™ column pH range Applications
Sample Water Soluble M.W. >2,000 Size Exclusion CQP10 2-12 Proteins, Biopolymers
CQP30 Water soluble polymers
Ion Exchange XtalSpeed™ Proteins, Antibody
Reversed-Phase CMG20 Proteins, Peptides
CHPOD
CHP20 Full range Proteins, Peptides
CHP07
M.W. <2,000 Size Exclusion CK02A 6-7 Oligosaccharides
CK02AS
CK04S
CK04SS
CQP06 2-12 Peptides
Ion Exclusion CK10U 1-14 Amino acids
CA08F 1-13 Organic acids Saccharides
Ion Chromatography SCA04 3-7 Anions
SCK01 1.5-12 Cations
CHK45
Reversed-Phase CMG20 2-12 Organic Compounds peptide
CHPOD
CHP20 Full range
CHP07
Mix mode CHK40 Full range Amino acids, Nucleotide
CHK45
Ion Exchange CK08EH 1-7 Organic acids
Ligand Exchange CK08E Series Saccharides
CRS10W 5-7 Optical isomers (α-amino acids・α-hydroxy carboxylic acids)
CRS15W
Organic Solvent Soluble Reversed-Phase CHP20 Full range Organic Compounds
CMG20
CHP07
Normal Phase CMG20 2-12
CHPOD
Mix mode CHK40 Full range